Steps of Replacing Weather Stripping in a Vehicle
Where your vehicle has been affected by rust, it can be very smelly and you will not enjoy the ride in such a vehicle. It is quite an easy task to repair such a vehicle as you can replace the seals on your own. It can just be a matter of the breaking seals due to too much rusting and hence allowing water passage into the car. Excess rust can lead to breakage of your vehicle hence threatening the safety of those using the vehicle. It is often that at this point most people will opt to hire a repair professional but you can repair the vehicle by yourself too. Here are some of the guidelines to use in carrying out such a repair.
Get to know which place on your car needs to be attended to. Where you are checking your vehicle, probably in a span of three months, ensure that the window seals are okay and can move smooth. Ensure that the strips of the door are in a good condition and there is no difficulty in either closing or even opening them. Absence of humidity and the tightness of the windshield is what will confirm that they are in a normal state. You can check on how closed the car’s trunk is by using a hose pipe to flash water at a very high pressure and see if it seeps in. In a case where the rubber has lost their initial color you will know that it is the effect of the sun.
Secondly, identify a place where you can purchase the rubber seals for replacement. Sometimes it is a very hectic process to identify the best company to buy these materials from. You can decide to go to the dealers by yourself or ask for the best automotive business owners. It is advantageous as they can give you the bet options for seal. Using the internet and a relevant homepage dealing with automotive is yet another option as you can make your orders online by just describing your vehicle’s type.
Thirdly, you ought to have clear knowledge on the replacement technique of the weather stripping. This must start from a point where you are removing the already damaged weather stripping and cleaning the surface of that metal where the rubber has been dismantled. After cleaning using the brake cleaner, take your vehicle to a place where there is enough blowing air so that it can dry naturally by itself. Place a new weather stripping in its position by the use of an adhesive and should happen only after the car has completely dried.
Lastly, you can finalize with a cleanup where you can put together seals by using a tape and then remove them after they dry in air. You ought to be careful here to avoid any damages.